Headlines

BUD RACING’S RADICAL ALUMINUM FRAMED KX125 TWO-STROKE

February 12, 2016
Comments off
17805 Views
facebooktwittergoogle_plusredditmailfacebooktwittergoogle_plusredditmail

SUBSCRIBEINTERNALClick on images to enlarge

BUDRIGHTSIDEBud’s two-stroke project bike started life as a Kawasaki KX250F four-stroke. It is equipped with Ohlins suspension, 270mm Braking front rotor, Bud Racing wheels, rear holeshot device, triple clamps and graphics. It weighs 208 pounds.

Bud Racing fields one of the largest motocross teams in Europe and are well known in America for bring French GP rider Maxime Desprey over to race the 2016 AMA 250 West Supercross series —until he got hurt. Bud has a U.S. race shop in Elsinore, California, but their base of operations is in France.

 

BUDFRAMEThe KX250 frame was extensively modified to accept the YZ125 engine. The complete frame cradle has been rebuilt along with a new head stay and motor mount brackets.

As an official Kawasaki supported race team, Bud Racing has a thriving development program that brings young French riders up from the minicycle to the 250 classes, both EMX and the French Nationals, but, what Bud noticed was that riders coming off of 85cc bikes had a tough time making the jump to a 224-pound 250cc four-stroke. As they prepared French minicycle sensation Brian Moreau for the transition from little bike to big bike they had an epiphany — why not have Brian race a full-size KX250F chassis, but with a 125cc two-stroke engine. That way Brian would be riding a familiar two-stroke engine, similar, in the exact chassis that he would eventually in racing in the future. As planned, Brian will race this bike in this season’s EMX 125 Two-Stroke Championship.

BUDLEFTSIDEBud Racing’s goal was to build a bike that would allow a KX85 rider to transition from a minicycle to a big bike without having to struggled with the weight of a four-stroke. Plus, since every KX85 rider is a proficient two-stroke rider, the only change in riding style would be for the more powerful 125cc two-stroke engine.

Thus, Bud Racing has built a special 125cc two-stroke powered KX250F. However, there were issues. As an official Kawasaki team, Bud could not find a sufficient supply of Kawasaki KX125 engines, since that model had been discontinued years ago. To make the project work they needed a solid 125cc two-stroke for which a large base of hop-up info and a good supply of part was available. The answer? A Yamaha YZ125 engine in a Kawasaki KX250F frame. The YZ125 engine is still in production and technical information abounds.

Of course the YZ125 engine didn’t fit. But Bud was ready for that and built a very special aluminum-framed KX250F to house the YZ125 engine. Here are some of the close-up details of Bud Racing’s KX125 Aluminum Edition.To learn more about Bud Racing go to www.budracing-usa.com or call (951) 245-2660.

SONY DSCThe work that went into reconstructing the KX250F frame cradle is evident in this photo. Everything from the down tube to the swingarm pivot is new.

BUDENGINERIGHTAlthough the YZ125 engine was a strange choice for a Kawasaki-backed race team, the logic of the move was based on parts availability. Bud ports the cylinder, adds their own cylinder head and runs a Bud designs HGS exhaust system.

SONY DSCBud’s KX250F framed YZ125 uses a special carbon fiber silencer, but the trickest part is the hanger bracket.

BUDENGINENOTPIPEVirtually every parts from the frame to the radiators to the head stay to the airboot to the gas tank to the airbox had to be specially designed to fit the engine/frame combination.

SONY DSCBud supplied the ignition and clutch covers and shift lever. The footpegs are titanium as are most of the bolts.

SONY DSCIn order to utilize the KX250F radiators, Bud Racing had to plug up the old fittings and weld a new spigot to align with the YZ125 hoses.

SONY DSCThe carbon fiber gas tank was a major part of the Bud Racing project bike, but since the YZ125 engine does not have fuel injection or a fuel pump, all of the four-stroke gas lines had to be removed and new plate designed to accept a petcock. The carbon fiber and titanium parts, along with the lightweight two-stroke engine, knock 16 pounds off  the the KX250F.

For more info on Bud Racing and its products go to www.budracing-usa.com

SUBSCRIBEINTERNAL

facebooktwittergoogle_plusredditmailfacebooktwittergoogle_plusredditmail

Comments are closed.