After a moto, take a look at your rim right beneath the tire bead. Look
closely and you will see that the bead of the tire has rubbed against
the edge of the rim and cleaned a thin strip around the aluminum rim.
This is called “rim scrub” and is caused by the tire’s lower sidewall
folding over the top of the rim flange under compression.
Rim scrub is an easy way to calculate how much sidewall flex your bike has. It can be used to tell if you have too little or too much air in your tire. Additionally, excessive rim scrub can also occur if the tire sidewall casing structure is too soft. The goal is to find a balance between tire stiffness and tire air pressure.
Factory mechanics pay attention to rim scrub when setting a bike up for specific tracks. Says longtime motocross tire specialist Frank Stacy, “I personally started studying rim scrub in the mid-1980s. I was employed by Dunlop and was testing with Team Honda. Ricky Johnson, mechanic Brian Lunnis and I were testing prototype front tires. Out on the track, RJ was having issues with lack of feel under hard cornering and holding his line. Lunnis and I noticed that each time RJ came in to change to the next tire, his rim edges were completely cleaned off. As much as 10mm of his rim had been polished clean by the sidewall (we also noticed that the lower sidewall of the tire was polished where it was touching the rim).
“It was then that a light bulb went on and I began to study the effects of rim scrub. We had similar issues when first developing 19-inch rear tires in the late 1980s. The tires scrubbed the flange like crazy, and the shorter sidewalls of the 19-inch tires folded over so much it damaged the rim. We began running higher air pressure, but got to a point where the wheels began to bounce too much and lost too much traction. Dunlop’s only option was to improve sidewall stiffness, which then allowed us to run the lower air pressure we needed for good traction.”
HERE ARE SOME TIPS ABOUT RIM SCRUB AND HOW TO USE IT.
Chunking: The obvious signs of too much air pressure are a lack of traction, harsh ride quality and excessive tire deflection on bumps or ruts. Knob chunking can also be a sign (since too much air pressure limits the tire casing’s ability to flex, which puts more force on the base of the knobs themselves).
Flex: The obvious signs of low air pressure are rim damage or heavy flex markings (or even cracking in the tire sidewall). You may also see excessive flex marks at the base of the knobs themselves due to the soft tire casing allowing the knobs to bend at the base under force.
Heavy-duty tubes: You can generally run 1 to 1.5 psi lower tire pressure with heavy-duty tubes. The thicker tube’s rubber adds to the stiffness of the tire casing. The thicker sidewall effect also makes the tire much less susceptible to pinch flatting.
The ballpark number: Average rim scrub should be between 3 and 5mm. Keep in mind that there is a balance between the tire pressure and tire casing structure. Different makes and models of tires will require a different air pressure to achieve the optimum traction, feel and rim scrub.
Rim and tire shape: The shape of the tire bead area and how it physically fits the rim flange will also affect rim scrub (as does the shape of the rim). Tires that have bead savers or large lips in the lower sidewall area mold more or less around the rim flange when the tire casing flexes over. Tires like this will scrub the rim less than 3mm or more than 5mm. The popular Excel rim has a flatter shape than a DID rim. A tire on an Excel rim scrubs a wider band because the sidewall folds more sharply over the edge of the flange.
Tubeless tires: Because tubeless tires generally run a lower air pressure, you can get away with a little more rim scrub (it shoudl be noted that tubeless tires are rare outside of the Tubliss system...which has a bicycle tube). Just watch going too low. If the rim dents too much, the tire bead will lose air and go flat.
Common sense: Rim scrub is very much like a clue at a crime scene. Take note of how much rim scrub you have at different tire pressures and then compare it to how the tire performs. Once you learn the connection, you can fine-tune your tire’s performance at a glance.