HUSQVARNA’S ALL-NEW 74 HORSEPOWER LONG-RANGE 701 ENDURO
Husqvarna has announce the 2020 701 Enduro Long-Range (LR). It is a 692cc, single cylinder, enduro machine for riders wanting to travel further. With its fully integrated 6.6 gallon fuel tanks, it is the perfect machine for extended, adrenaline-filled on-road or off-road adventures, allowing up to 300 miles between fuel stops.
Based on the 701 Enduro, the 2020 Husqvarna 701 Enduro Long-Range offers a ride-by-wire throttle system, Bosch ABS lean angle sensitive traction control, switchable ride modes, 48mm WP XPLOR upside-down forks, Chromoly steel trellis frame, a WP XPLOR rear shock and excellent all-terrain capabilities.
THE CAKE KALK INK ELECTRIC BIKE
Cake, a Swedish manufacturer of lightweight electric off-road motorcycles, announced the launch of Cake Kalk INK. Hardly a dirt bike, the Cake Kalk INK is a light-use off-road electric motorcycle capable of reaching 50 mph and having a run time of 3 hours on a single charge. The Kalk INK is based on the technology of the performance-oriented Kalk OR, featuring the same powerful drivetrain, battery, and robust 6061 aluminum frame/swingarm. The Kalk INK differentiates itself from Kalk OR by utilizing a no-link rear suspension, lightweight motocross front suspension, a 19-inch wheelset and injection-molded polycarbonate fenders and bodywork.
It is obvious that Cake is strongly influenced by downhill and cross-country mountain bikes. Cake will start shipping the Kalk to online customers and select retailers on June 1, 2020. In case you want to know, the name Kalk is derived directly from Kalksten, the limestone bedrock of the Swedish island of Gotland, where Cake’s test grounds are located (INK refers to the motorcycle’s black plastic bodywork). Learn more about Cake at www.ridecake.com.
BEHIND THE SCENES AT THE BRITISH GRAND PRIX: ALL YOU NEED TO KNOW AND MORE!
UPDATED 2020 REM MOTOCROSS SIX-MONTH RACE SCHEDULE
REM has updated their race schedule for the first six months of 2020, and since we are already in March, it is only and updated four-month schedule (from March until the end of June). At the bottom of the schedule are three special races. The May 2 REM Vet Cup, the July 3-5 Commotion-By-The-Ocean tribute race and the October 31 Octobercross. For more information go www.remsatmx.com.
MXA PRODUCT SPOTLIGHT: RISK RIPPER AUTOMATED TEAR-OFF SYSTEM
GLEN HELEN TO BE OPEN ON TUESDAYS FOR OPEN PRACTICE
Starting March 17, 2020, Glen Helen Raceway will be opening Tuesday’s for open practice. Glen Helen Raceway has always been open on Thursdays for practice on the National, REM and Pee-Wee tracks—in addition to having those tracks open for practice on Saturdays and Sundays when there aren’t organized races scheduled on those days. However, starting on March 17, Glen Helen will be open on Tuesdays from 1:00 p.m. to dusk. Their Grand Opening Tuesday will have a special $20 gate fee. For more info go www.glenhelen.com
WANNA RACE IN SOCAL? NEED TO RENT A BIKE? FIND A PLACE TO STAY? NEED MOTOCROSS INSTRUCTION: JUST CALL STAPO
In his spare time, when he’s not testing with MXA, racing in a foreign country, going to Japan or helping many of his motocross buddies, MXA test rider Dennis Stapleton opens up his house, garage, bikes and mechanics to help riders who would like to come to SoCal on a motocross vacation. He offers full service to all of the Southern California tracks for racers or for play riders. Whether you want to rent a bike, move in for a week, race at Glen Helen or take motocross lessons—this is one-stop shopping. Just send them an email (Stapoknobbyshop@gmail.com). If you’d like to live the SoCal lifestyle for a day, a weekend, a week, a month or three months, visit Dennis Stapleton’s’ website at www.knobbyshopsouth.org for more details!
SEVEN RIDERS WHO WILL HAVE TO WAIT UNTIL NEXT YEAR TO TRY FOR THE 450 SUPERCROSS CHAMPIONSHIP
Husqvarna’s Zach Osborne, Kawasaki’s Adam Cianciarulo, Rocky Mountain KTM’s Justin Bogle, KTM’s Marvin Musquin, JGR Suzuki’s Broc Tickle, JGR Suzuki’s Fredrik Noren and JGR Suzuki’s Joey Savatgy are the well-funded and factory-backed 450 riders who are out of the 2020 AMA Supercross series—some before the first race and the rest before the halfway point in the 17-race series.
MXA RIDES THE 72-HORSE KTX500e TWO-STROKE: ONE-THIRD KX500, ONE-THIRD KTM & ONE-THIRD HAND-MADE
2020 AMA SUPERCROSS WINNERS AT A GLANCE
Venue 450 250
1. Anaheim 1………….Justin Barcia………..Justin Cooper
2. St. Louis………………Ken Roczen…………..Austin Forkner
3. Anaheim 2………….Eli Tomac………………Dylan Ferrandis
4. Glendale…………….Ken Roczen…………..Austin Forkner
5. Oakland……………..Eli Tomac……………….Dylan Ferrandis
6. San Diego…………..Cooper Webb……….Dylan Ferrandis
7. Tampa…………………Eli Tomac……………….Shane McElrath
8. Arlington……………Eli Tomac……………….Chase Sexton
9. Atlanta………………Ken Roczen…………….Chase Sexton
16. Las Vegas………..
17. Salt Lake City….
450 Points leader…Eli Tomac/Ken Roczen (tie)
250 West Points leader…Dylan Ferrandis
250 East points leader…Chase Sexton
AMA SUPERCROSS STANDINGS HEADING TO THE 2020 DAYTONA SUPERCROSS
AMA 450 SUPERCROSS STANDINGS
(After 9 of 17 rounds)
1. Eli Tomac (Kaw)…200
2. Ken Roczen (Hon)…200
3. Justin Barcia (Yam)…177
4. Cooper Webb (KTM)…176
5. Jason Anderson (Hus)…151
6. Malcolm Stewart (Hon)…137
7. Adam Cianciarulo (Kaw)…128
8. Justin Hill (Hon)…127
9. Justin Brayton (Hon)…116
10. Dean Wilson (Hus)…113
AMA 250 EAST SUPERCROSS STANDINGS
(After 3 of 9 rounds)
1. Chase Sexton (Hon)…75
2. Shane McElrath (Yam)…70
3. R.J. Hampshire (Hus)…61
4. Garrett Marchbanks (Kaw)…53
5. Jordon Smith (Kaw)…47
6. Jeremy Martin (Hon)…44
7. Jo Shimoda (Hon)…44
8. Josh Hill (Yam)…41
9. Enzo Lopes (Hon)…36
10. Joey Crown (Yam)…31
AMA 250 WEST SUPERCROSS STANDINGS
(After 6 of 10 rounds)
1. Dylan Ferrandis (Yam)…135
2. Justin Cooper (Yam)…128
3. Austin Forkner (Kaw)…122
4. Brandon Hartranft (KTM)…110
5. Alex Martin (Suz)…98
6. Jacob Hayes (Hus)…89
7. Luke Clout (Hon)…83
8. Michael Mosiman (Hus)…82
9. Derek Drake (KTM)…78
10. Mitchell Oldenburg (Hon)…72
THE HANDY-DANDY TRACK MAPS OF ROUNDS 10 & 11 — DAYTONA & INDIANAPOLIS
THE APRIL 2020 ISSUE IS JAM-PACKED FULL OF BIKE TEST & TECH ARTICLES
If you subscribe to MXA you can get the mag on your iPhone, iPad, Kindle or Android by going to the Apple Store, Amazon or Google Play or in a digital version. Even better you can subscribe to Motocross Action and get the awesome print edition delivered to your house by a uniformed employee of the U.S. Government. You can call (800) 767-0345 or Click Here (or on the box at the bottom of this page) to subscribe.
ASK THE MXPERTS: CAN I RUN A KTM CLUTCH BASKET ON MY HONDA CRF450?
Everyone raves about the KTM’s CNC-machined steel clutch basket. I realize that the KTM parts won’t fit on my Honda CRF450, but does anyone make a steel clutch basket for a 2018 Honda CRF450?
You can get an added dose of KTM clutch performance out of your CRF450 with Hinson’s Momentum steel clutch basket. It is CNC-machined out of a billet of solid steel and weighs 2 pounds more than the stock cast-aluminum basket. If you are tired of notching baskets and changing clutch plates on the judder spring-equipped CRF450 clutch, the Hinson basket is for you. Hinson makes the steel clutch basket for riders who never want to worry about the lifespan of their clutch baskets. The steel basket is extremely wear resistant, has oil ports to help lubricate the plates, and improves clutch performance because of its stiction-free tangs.
MXA was initially worried about what the heavy basket would do to throttle response and power output. Amazingly, most MXA test riders liked the feel. The whole clutch felt smoother in action because the plate drag on the basket’s tangs was reduced. At the worst, the test riders felt that the heavy basket took the edge off of the harsher parts of the CRF450 powerband, slowed the revs down in the midrange and broadened the over-rev. Perhaps, because of the direction of the rotation of the clutch, it operates more like a giant counterbalancer than a flywheel weight; it had none of the attributes of a heavy flywheel.
The Hinson Momentum clutch is available for Hondas, Yamahas, Suzukis and Kawasakis. At $384.99, the CNC-machined steel Hinson basket costs $60 more than their Akadized aluminum basket. For more information, go to www.hinsonracing.com or call (909) 946-2942.
CLASSIC MXA TEST RIDER PHOTOS: DARYL ECKLUND FLYING HIGH OVER THE PACIFIC
REM GOES FOUR-FOR-FOUR ON MARCH 7, 14, 21 & 28 AT GLEN HELEN
INAUGURAL “DAY IN THE DIRT DOWN SOUTH” AT DADE CITY ON MARCH 13-15
6TH ANNUAL MOTO MASTERS VET SERIES STARTS ON MARCH 14 AT JOHNSVILLE MX FARM
2020 ARIZONA STATE CHAMPIONSHIP SERIES RACES ON MARCH 22 AT CANYON RACEWAY
2020 OLD SCHOOL SCRAMBLES TT AT GLEN HELEN ON MARCH 29
2020 WISECO/FASTHOUSE WORLD TWO-STROKE CHAMPIONSHIP COMING ON APRIL 10-11
2020 CZ WORLD CHAMPIONSHIP ON APRIL 24-26 AT MARYSVILLE
GLEN HELEN’S 6-HOUR ENDURANCE RACE THIS SUNDAY
36TH ANNUAL WORLD VET MOTOCROSS CHAMPIONSHIP: START PLANNING NOW
LOOKING AHEAD! THE 2020 RACE CALENDAR
2020 AMA SUPERCROSS CHAMPIONSHIP
Jan. 4…Anaheim, CA (West)
Jan. 11…St. Louis, MO (West)
Jan. 18 …Anaheim, CA (West)
Jan. 25…Glendale, AZ (3-Moto) (West)
Feb. 1…Oakland, CA (West)
Feb. 8…San Diego, CA (West)
Feb. 15…Tampa, FL (East)
Feb. 22… Arlington, TX (3-Moto) (East)
Feb. 29… Atlanta, GA (East)
Mar. 7…Daytona Beach, FL (East)
Mar. 14…Indianapolis, IN (East)
Mar. 21…Detroit, MI (East)
Mar. 28…Seattle, WA (West)
Apr. 4…Denver, CO (East/West)
Apr. 18…Foxborough, MA (East)
Apr. 25…Las Vegas, NV (3-Moto) (West)
May 2…Salt Lake City, UT (East/West)
2020 AMA ARENACROSS CHAMPIONSHIP
Jan. 3-4…Loveland, CO
Jan. 11…Hobbs, NM
Jan. 24-25…Oklahoma City, OK
Jan. 31-Feb. 1… Denver, CO
Feb. 7-8…Reno NV
Feb. 28-29…Salt Lake City, UT
Mar. 7… Amarillo, TX
2020 AMA NATIONAL CHAMPIONSHIP
May 16…..Hangtown, CA
May 23…..Pala, CA
May 30….Thunder Valley, CO
Jun. 6……Jacksonville, FL
June 20…Mt. Morris, PA
June 27…Southwick, MA
July 4……Red Bud, MI
July 18….Millville, MN
July 25….Washougal, WA
Aug. 15…Unadilla, NY
Aug. 22…Budds Creek, MD
Aug. 29…Crawfordsville, IN
2020 AMA SUPERMOTO CHAMPIONSHIP
Apr. 4-5… Primm, NV
May 2…Honolulu, HA
May 30…Dacono, CO
July 31-Aug. 2…Trois-Rivieres, Quebec
Sept. 11-12…Sturgis, SD
2020 FIM MOTOCROSS WORLD CHAMPIONSHIP
Mar. 1…Great Britain
Apr. 5…Italy #1
May 17…Italy #2
June 28…Jakarta, Indonesia
July 5…Palembang, Indonesia
July 26…Czech Republic
Sept. 13…Shanghai, China
Sept. 20…Italy #3
2020 FIM MOTOCROSS WORLD SIDECAR CHAMPIONSHIP
May 10…Czech Republic
Sept. 13…Czech Republic
2020 FIM MOTOCROSS DES NATIONS
Sept. 27.…Ernee, France
2020 WORLD TWO-STROKE CHAMPIONSHIP
April 10-11.…Glen Helene, CA
2020 AMA ENDUROCROSS CHAMPIONSHIP
Aug. 22…Prescott Valley, AZ
Oct. 3,…Amarillo, TX
Oct. 10…Denver, CO
Nov. 7…Boise, ID
2020 WORCS OFF-ROAD CHAMPIONSHIP
Jan. 26…Primm, NV
Feb. 23…Taft, CA
Mar. 22… Havasu, AZ
Apr. 19…Blythe, CA
May 3…Las Vegas, NV
May 31…Cahuilla Creek, CA
July 19…Prineville, OR
Sept. 20…Glen Helen, CA
Oct. 18…Mesquite, NV
Nov. 15…Primm, NV
2020 WORCS SPRINT ENDURO CHAMPIONSHIP
Feb. 14-15…Taft, CA
June 5-6…Cahuilla, CA
June 24-25…Prineville OR
Sept. 26…Glen Helen, CA
2020 CANADIAN NATIONAL CHAMPIONSHIP
May 31…Wild Rose, AB
June 7…Blackwater, BC
June 14…Dorva, AB
June 21…MotoVally, SK
July 12…Gopher Dunes, ON
July 19…San Del Lee, ON
July 26…Riverglade, NB
Aug. 2…Deschambault, QC
Aug. 16…Walton, ON
2020 MICHELIN BRITISH NATIONAL CHAMPIONSHIP
Mar. 22…Fatcat MotoParc
Apr. 19…Desertmartin, Ireland
Apr. 26…Hawkstone Park
July 5…Canada Heights
Sept. 6t…Cusses Gorse
2020 BRIDGESTONE BRITISH MASTERS CHAMPIONSHIP
Aug. 1-2…Iron Works Moto
Sept. 19-20…Cusses Gorse
2020 ACU BRITISH NATIONAL CHAMPIONSHIP
June 21…Deertmartin, Ireland
2020 IRISH NATIONAL CHAMPIONSHIP
2020 AUSTRALIAN NATIONAL CHAMPIONSHIP
April 4-5…Horsham, Victoria
May 3… Newry, Victoria
June 28…Glympie, Queensland
July 25-26…Maitland, New South Wales
Aug. 22-23…Coolum, Queensland
2020 AUSTRALIAN SUPERCROSS CHAMPIONSHIP
Oct. 3 …Western Australia
Oct. 17… South Australia
Nov. 7 …New South Wales
2020 ADAC GERMAN NATIONAL CHAMPIONSHIP
Apr. 13…Fürstlich Drehna
May 31…Möggers, Austria
2020 REM COMMOTION BY THE OCEAN
July 3-5…Glen Helen, CA
2020 AMA NATIONAL AMATEUR CHAMPIONSHIP
Aug. 3-8….Hurricane Mills, TN
2020 FIM JUNIOR WORLD CHAMPIONSHIP
Aug. 8-9…Megalopolis, Greece
Oct. 31…Glen Helen, CA
2020 DUBYA WORLD VET MOTOCROSS CHAMPIONSHIP
Nov. 6-8…Glen Helen , CA
MXA PRODUCT SPOTLIGHT: DUBYA USA EDGE WHEELSETS
Dubya USA, a provider of premium motorcycle wheel sets and components, is proud to announce the all-new Edge Wheel sets. These wheels are the perfect solution for riders who need quality and performance at an economical price point.
The Edge hubs are available in red, green blue or orange with black or silver rims at a very affordable price.
We’re excited to add these new Edge wheel sets to the Dubya USA lineup,” said Dubya co-founder Kristin White Anderson. “We strive to deliver the best products possible to our customers, but top-of-the-line wheels are not in everyone’s budget. The Edge wheels are durable and reliable, and are affordable for virtually any rider looking to replace their old wheels or simply give their bike a more upgraded look.”
Edge wheel set centers around the highly durable forged aluminum Edge hub, which are offered in factory colors of blue, red, green, and orange. The hubs are laced to your choice of black or silver Excel Notako rims using stainless steel Bulldog spokes and nickel plated steel nipples. Each wheel is pre-assembled in Dubya USA’s southern California facility by the same technicians who assemble all of Dubya’s top professional rider and team wheels.
Edge wheel sets are priced at $639.00. Visit www.DubyaUSA.com for more details or call 714-279-0200 to speak to a wheel specialist.
MXA PRODUCT SPOTLIGHT: PRO CIRCUIT’S 2020 KTM 300XC TPI & HUSKY TE300I PIPES & SILENCER
Pro Circuit has gotten rave reviews for its pipes and silencers for the 2020 KTM 300 XC TPI and 2020 Husqvarna TE 300i models. These pipes/silencers also fit on the Some of the KTM’s Six Days and Erzbergrodeo, along with the Husqvarna 2020 TC250/300 model.Pro Circuit’s line of pipes and silencers for the new KTM and Husqvarna models offer a noticeable performance and horsepower boost across the entire RPM range. Add a bit more performance and fun into your next riding experience. There are two pipes to choose from and we run the R-304 Shorty Silencer:
Works Pipes. The original Pro Circuit Works Pipe offers unparalleled performance for every two-stroke application. Increased horsepower and torque gains will quickly be noticed across the entire rpm range. The unplated, oiled metal finish requires some maintenance, but really gives your bike that “works look.” Retail price—$262.46.
Platinum Pipe. The Platinum Pipe offers the same performance gains as the Works Pipe, but is constructed from AKDQ high-quality carbon steel and includes a nickel plated finish to protect the pipe against nature’s elements. The Platinum Pipe also features pounded seams and reinforced mounting brackets and stingers for increased durability. Retail price—$262.46.
R-304 Shorty Silencer. The R-304 Shorty Silencer was developed as a full-race two-stroke silencer. The compact design of the short aluminum canister offers optimum performance gains and is recommended for closed-course racing only. Hex head screws are used or quick re-packing. Retail price—$141.71. For more info on these products go to www.procircuit.com
MXA PRODUCT SPOTLIGHT: KTM POWERPARTS ACCESSORIES
The most commonly used Torx, Allen, socket, screwdriver blades, adaptors, ratchet, extensions and breaker bar in a form-fitting case. It is design to make working on almost every KTM nut or bolt from 50cc to 505cc. Retail price—$145.99.
KTM 300CC FACTORY ENGINE KIT
All the parts needed to turn your 250SX into a 300SX (including cylinder, gaskets, piston, rings, cylinder head, black box, wrist pin, circlips and power valve). It is a bolt-on engine kit that boosts power by 4.25 horsepower more than the stock 250SX engine. Retail price—$956.99.
This orange anodized triple clamp includes the steering stem with the bottom bearing already pressed on. It features adjustable offset (20mm or 22mm) and a special split clamp design to optimize perfect grip on the fork tubes. Identical to the 2020-1/2 KTM FC450 Factory Edition triple clamps. Retail price—$623.99.
The orange anodized CNC-machined hubs are laced to D.I.D DirtStars rims with orange anodized aluminum spoke nipples with 36 black anodized spokes. The rear wheel comes in either 18-inch or 19-inch diameters on 2.15-inch DID DirtStar rims. Retail price—$424.99 (front), $499.99 (Rear).
KTM Power Powerparts are available at your friendly local KTM dealer. to find a KTM dealer near you Click Here.
MXA PRODUCT SPOTLIGHT: ZETA RACING REVOLVER SHIFT LEVER
Zeta Racing offers some of the most interesting aftermarket products in the sport and their Revolver shift lever is no exception. The shift lever tip can be adjusted toof six different positions to better suit a rider’s boots or rrding style. The shift tips mounting hole works like an eccentric cam, allowing the rider to move the position of the tip by unbolting it and move the eccentric to raise, lower, extend or angle the shift tip fore or aft. Between six different position every ride should be able to find his sweet spot. The shift arm is made of A2014 forged aluminum. It is black anodized and laser prints for durability. The retail price is $37.95. For more info go to www.zeta-racing.com.
MXA PRODUCT SPOTLIGHT: 2020 MOOSE AGROID GEAR
Unlike last year’s Moose M1 Agroid line, which was built on the M1 racewear chassis with Agroid graphics, the 2020 Agroid racewear line is brand-new from the ground up. Maximum comfort and mobility are achieved with the Agroid jersey and pant by using the latest stretch polyester materials and laser-cut vent holes. Moose Agroid gear is offered in four different color combinations and there is nothing stopping you from running the mint-highlighted jersey with the orange-accented pants or vice versa.
2020 Moose Agroid jersey: The Agroid jersey retails for $49.95 in aqua green, red, navy white and black grey.
2020 Moose Agroid pants: Available in sizes 28” to 42”. The pants retail for $139.95 in in aqua green, red, navy white and black grey. For more information go to www.mooseracing.com.
MXA PRODUCT SPOTLIGHT: BOLT BRAND SPECIFIC BOLT KITS
MXA PRODUCT SPOTLIGHT: “THE INSIDE LINE: RACING THE 500CC WORLD MOTOCROSS CHAMPIONSHIP”
Never-before-published images from some of the sport’s most acclaimed photographers highlight the book. Author Rob Andrews says: “I feel very fortunate that the best years of my GP racing career coincided with an incredibly memorable period for the 500cc World Championship. To be able to share my own experiences of that great time in motocross grands prix is equally exciting.” On sale at www.theinsidelinebook.com now—worldwide shipping is available.
MXA PRODUCT SPOTLIGHT: COBRA CX50 / CX65 PRO LAUNCH START DEVICES
MXA PRODUCT SPOTLIGHT: MOTO TASSINARI VFORCE4R
MXA PRODUCT SPOTLIGHT: O’NEAL LIMITED EDITION PRODIGY GEAR
O’Neal Racing has introduced special run of Limited Edition tribute gear top celebrate their 50 years of product technology. The new Limited Edition Prodigy gear, in a special reflex black/neon red color combination combination all of most advanced features that a motocross racer would want.
The Limited Edition Prodigy jersey features ‘’4-Cell” Performance Fabric with 4-way stretch. The 4way stretch vented panel on the entire back to allow maximum movement for an athletic fit. Plus the proprietary “Infinity” cuff and collar are lined with stretch material for maximum comfort. The graphics are sublimated into the fabric so they will never fade and the Prodigy jersey weighs on 7 ounces.
The retail price for the Limited Edition Prodigy gear is $74.99 for the jersey and $219.99 for the pants. For more information Click Here.
MXA PRODUCT SPOTLIGHT: FACTORY EFFEX 2020 BEANIE COLLECTION WITH & WITHOUT POMS
Looking for a way to keep your lid warm during the upcoming winter and spring racing season. Look no further than Factory Effex beanies. For more information go to www.factoryeffex.com.
TALK MOTO WITH ON MXA’S FACEBOOK GROUP CHAT
FOLLOW MXA ON TWITTER
MXA YOUTUBE CHANNEL | HIT THAT SUBSCRIBE BUTTON
Photos: Brian Converse, Josh Mosiman, Debbi Tamietti, Dan Alamangos, Daryl Ecklund, MXA,