WORKS CONNECTION 2006 HONDA CRF450 PRODUCT INFO
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Skid Plateÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿRetail $69.95ÿÿ ÿÿÿÿÿÿÿÿÿÿ
Made from aircraft grade aluminum. Covers frame rails, but does not extend beyond rails. An oil drain access hole is pre-cut into the plate for easy oil changes without having to remove the skid plate. Features-Aircraft grade brackets, quality hardware, and a one-of-a-kind fit. Factory Foam is included. Made in the
ÿ
Rear Master Cylinder Guardÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿRetail $32.00
Covers rear brake master cylinder and provides increased surface area for better grip. Helps prevent costly replacement of rear brake master cylinder or a “DNF’.ÿ Made in the
ÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPart #15-092ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
ÿ
Engine Guards (pair)ÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿRetail $99.95
Simple Bolt-on. Features Aluminum Construction, TIG welded, Stronger than Stock Plastic. Made in the
ÿ
Ignition Cover Protectorÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Retail $99.95ÿÿ
Our aluminum, TIG welded Ignition Cover Protector will replace your stock plastic engine guard and provide additional protection for the left side engine case as well as extended coverage to protect the ignition cover.
ÿIts simple bolt-on design attaches it to the engine guard mount point and a motor mount to secure the Ignition Cover Protector solidly to the frame. With the Ignition Cover Protector installed the oil filter is still easily accessable which helps to speed maintenance.
Made in the
ÿ
Engine Guard (right side only)ÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿRetail $49.95
Simple Bolt-on. Features Aluminum Construction, TIG welded, Stronger than Stock Plastic. Made in the
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Radiator Braces (pair) ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿRetail $59.95
Made from aircraft grade aluminum. Our Radiator Braces are lifesavers (or at least wallet savers) The replacement cost of a radiator is outrageous, our braces strengthen the radiators while giving additional protection from side impacts. Lightweight, custom fit, tuck in cleanly behind radiator shroud. Used by race teams world-wide! Made in the
ÿÿÿ Part #18-084
ÿ
Elite PerchTMÿ (For use with Rotating Bar Clamp with Hot Start Lever)ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿ ÿÿÿÿÿÿÿÿÿRetail $139.95
The Works Connection Elite Perch has been designed and is manufactured to meet the demands of even the most discriminating rider. If you liked the Works Connection Pro Perch you’ll absolutely love the Elite perch and its features. For this “next generation” of perch we’ve increased the strength of the perch body for improved performance and durability in all conditions. The “factory” red anodized on-the-fly adjuster now has machined grooves on it making adjustments in the heat of the battle easier than ever. We’ve CNC’d the clutch lever from solid billet aluminum into a “shorty” design and then machined our logo into the levers blade. The lever incorporates three sealed bearings and a large 8mm diameter pivot bolt to improve both lever action and longevity. A heavy-duty lever cover helps protect and keep the terra firma from gumming up the works. Making the reach for the lever adjustable to fit all sizes of riders and a nylon sleeve which allows the perch to rotate under impact are two features we include that you shouldn’t have to ride without.ÿ Why settle for the rest when you can have the best! Available in Blue or Red.
Made in the
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Part # 16-600 (Blue)ÿ #16-605 (Red)ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿ
ÿ
ÿElite PerchTM with Hot Start leverÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿ ÿ Retail $179.95
The Works Connection Elite Perch with thumb operated Hot Start has been designed and is manufactured to meet the demands of even the most discriminating rider. If you liked the Works Connection Pro Perch with thumb operated Hot Start you’ll absolutely love the Elite perch and its features. For this “next generation” of perch we’ve increased the strength of the perch body for improved performance and durability in all conditions. The “factory” red anodized on-the-fly adjuster now has machined grooves on it making adjustments in the heat of the battle easier than ever. We’ve CNC’d the clutch lever from solid billet aluminum into a “shorty” design and then machined our logo into the levers blade. The lever incorporates three sealed bearings and a large 8mm diameter pivot bolt to improve both lever action and longevity. A heavy-duty lever cover helps protect and keep the terra firma from gumming up the works. Making the reach for the lever adjustable to fit all sizes of riders and a nylon sleeve which allows the perch to rotate under impact are two features we include that you shouldn’t have to ride without.ÿ Why settle for the rest when you can have the best! Available in Blue or Red. Made in the
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Part #16-610 (Blue)ÿ #21-615 (Red)
ÿ
Pro Perchÿ (For use with Rotating Bar Clamp with Hot Start Lever)ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿRetail $125.00ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
Machined from aircraft grade aluminum for unmatched strength. On-the-fly star adjuster for easy adjustments. Forged lever has sealed ball bearings for ultra-smooth lever pull. Teflon sleeve allows perch to rotate (or spin on bar) in a crash or tip-over. Rubber boots keep out dirt and grime. You have seen the cheesy copies of our perch, don’t be fooled. If it doesn’t say ?Works Connection’ you are not getting the original or the best. Made in the
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Part # 16-045
ÿ
Pro Perch with Hot Start leverÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿ Retail $165.00
Machined from aircraft grade aluminum for unmatched strength. On-the-fly star adjuster for easy adjustments. Includes integrated ?shorty’ thumb operated ?hot start’ lever. Forged lever has sealed ball bearings for ultra-smooth lever pull. Teflon sleeve allows perch to rotate (or spin on bar) in a crash or tip-over. Rubber boots keep out dirt and grime. You have seen the cheesy copies of our perch, don’t be fooled. If it doesn’t say ?Works Connection’ you are not getting the original or the best. Made in the
ÿÿ Part #16-080
ÿ
Oil Filler Plugÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿ ÿÿRetail $22.00
Machined from billet aluminum. Red anodized. Replaces the stock plastic plug. Gives your bike the ?factory’ look. Used by race teams world)-wide! Available in Red or Blue. Made in the
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿPart #24-070 (Red)ÿ #24-071 (Blue)
ÿ
Throttle Tubesÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Retail $49.95
Machined from aircraft grade aluminum. Our billet throttle tubes are 100% stronger than stock, and our hard-anodized surface provides a smooth feel. All tubes have a knurled surface for grip adhesion. Used by race teams world-wide. Made in the
ÿÿ Part #22-160ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
EZ Holeshot ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Retail $99.95
The ?EZ Holeshot’ is a simple bolt-on item that prevents wheelying off the start. It compresses the forks down, then releases easily and automatically when the forks are compressed under braking. Made in
Part #19-220
Rear Caliper Guardÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ ÿÿÿRetail $27.50
Made from aircraft grade aluminum. Replaces the weak stock unit. Simple bolt-on. Made in the
Part #25-014
ÿBillet Frontÿ Brake Reservoir Cap ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿRetail $24.95
Add some style to your bike with these super trick brake reservoir caps. Machined from aircraft grade aluminum. These caps are polished to a mirror finish then anodized for a one-of-a-kind look. Available in Blue or Red. Made in the
Part #21-000 (Blue)ÿÿÿ #21-005 (Red)
ÿ
Billet Rear Brake Reservoir Cap ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿRetail $22.00
Add some style to your bike with these super trick brake reservoir caps. Machined from aircraft grade aluminum. These caps are polished to a mirror finish then anodized for a one-of-a-kind look.ÿ Made in
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Part #21-500 (Blue)ÿÿÿ #21-505 (Red)
ÿ
ÿRotating Bar Clamp with Hot Start Leverÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Retail $59.95
Add some style, durability and efficiency to your bike with a super trick Rotating Bar Clamp with Hot Start lever. Installs in place of your stock front brake master cyclinder clamp and moves the hot start lever to the right side of your bars. We’ve incorporated a poly sleeve into the design that allows the master cylinder to rotate upon impact and help prevent damage.ÿ Machined from aircraft grade aluminum and anodized for that “Factory Hardware” look. Available in Blue, Red or Silver. Made in the the
ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Part #312-599 (Blue) #31-600 (Red)ÿ #31-605 (Silver)ÿÿ
ÿ
Rotating Bar Clampÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ Retail $24.95
Installs in place of your stock front brake master cylinder clamp. We’ve incorporated a poly sleeve into the design that allows the master cylinder to rotate upon impact and help prevent damage.ÿ Machined from aircraft grade aluminum and anodized for that “Factory Hardware” look. Available in Blue, Red, Black,
Part #31-100 (Blue)ÿÿ #31-200 (Red)ÿ ÿ#31-400(Orange)ÿÿ #31-500 (Silver)
ÿ
Comments are closed.